In general, we try to support your local brick and mortar music stores
and luthiers. Instrument bridges, in particular, require proper
installation to achieve their best performance. A good instrument
set-up, done by an experienced professional, is always recommended.
Please check for a dealer in your area.
If there is not a dealer in your area but you have someone that you trust
to work on your instrument, we are willing to work with them to get
the correct bridge for your instrument. Either ask them to contact us
or email us thier contact information at email@example.com
and we will contact them for you.
You may also order a bridge directly if you feel comfortable doing your
own bridge installation. Please email us with the information listed
below and we will help you get the proper bridge.
To order a bridge directly from Bridger Products:
Measure the height of your existing bridge at the height you prefer:
from the top of your instrument to the top of the saddle.
Check the models that are listed below
and use the contact form to order:
If you are a dealer or builder, please use the contact form
for information about wholesale pricing.
Original Bridge, Ebony: Low - .6 to .9 Inches Height ______$ 70
Original Bridge, Ebony: Tall - .7 to 1.0 Inches Height ______$ 70
Original Bridge, Ebony: Ultra Low - .5 to .65 Inches Height ______$ 75
Original Bridge, Ebony: Flat - .5 to .65 Inches Height ______$ 75